Use Brim Points

Whether brim points are included in the set used for stabilization.

Default is cleared.

Caution: Only use brim points if the brim is relatively stable with respect to the head throughout the shot.

Base Frame Weighting

A number >=0 which gives the weight applied to the Base Frame Stabilization Errors in the overall stabilization error. Giving a higher weighting to this property places more emphasis on minimizing the total amount that each point moves in the take relative to the base frame.

Default is 1.0

Inter Frame Weighting

A number >=0 which gives the weight applied to the Inter Frame Stabilization Errors in the overall stabilization error. Giving a higher weighting to this property places more emphasis on minimizing the frame-to-frame point noise (jitter).

Default is 1.0

Stable Points Percent

Number between 0 and 1, representing your estimate of how many points in each frame of the take are stable. For takes with very little movement set this number to be as high as possible. For takes with a lot of facial movement, lower this value to reflect the fact that in each frame a significant proportion of the face is moving, relative to the points in the base frame.

Default is 0.25.

Max Processing Iterations

Maximum number of stabilization optimization iterations. A larger number results in a slower but potentially better stabilization.

Default is 50.